How to make it done

How to Make Your Door Sign

This is a simple step-by-step guide on how to colour your set:
  1. Use the scheme below to properly colour your pieces.
  2. Prepare the brush and paint that you found in the set. You can use any other acrylic paint if you want.
  3. Always use a dry brush for acrylic paint; no water is needed.
  4. Apply the paint in layers for a rich colour. You can use two or more layers, but make sure each subsequent layer is applied after the previous one has completely dried (approximately 10 minutes).
  5. After each layer (or before changing colors), wash your brush thoroughly to prevent unnecessary color mixing. Don't forget to dry the brush with a napkin or paper towel after washing.

Useful tips:

  • To prevent paint smudges on the edges and sides, try putting a small amount of paint in the center of the layer and then spreading it to the edges. Avoid picking up too much paint.

How to Glue Your Sign

  1. Glue after you painted all pieces.
  2. Apply some glue to the reverse side of the piece.
  3. Put the piece to its place.
  4. Apply gentle pressure, trying not to misplace it.
  5. Wait 15 to 20 seconds and repeat steps for other pieces.

Useful tips:

  • Apply glue as small dots (1-2 mm) at a distance of 1-1.5 cm to prevent the glue from spreading on the sides.

Colouring Scheme